1. Dry Out Your Home as Quickly as Possible
“Mold starts growing in damp places within 24 hours, and within two days, you can have visible colonies if it’s warm,”
The first step for getting rid of mold is to air out your house.
2 If you have power, turn on your air conditioner, a dehumidifier, and/or every fan you own. Keep your windows closed if you have a dehumidifier and an air conditioner to help the air circulate inside and get rid of excess moisture. Keep your windows open if you have only fans, and face the exhaust toward an open window.
If you don’t have power but you own a portable generator, use it so that you can follow the strategy above. Just remember that generators emit deadly carbon monoxide; to avert carbon monoxide poisoning, never run a generator indoors. And “make sure to place the generator at least 20 feet from your home, with the exhaust facing away from your house,” advises John Galeotafiore, associate director of product testing at Consumer Reports. If your generator isn’t connected to a transfer switch in your home, use a heavy-gauge extension cord (around 12-gauge), to keep the generator at a safe distance from your house.
No power at all? If weather permits, open all your windows and doors to create airflow.
3. Monitor the Moisture
While you’re airing out your home, use a humidity meter, around $15 at hardware stores, to keep tabs on the moisture level. Aim for between 30 and 50 percent humidity to inhibit mold growth, the EPA advises [PDF].
Floors, walls, and furniture may be dry to the touch and still harbor mold and bacterial growth. A moisture meter, $50 at hardware stores, is another good tool to have, so you can detect dampness you can’t see.
4. Remove Debris
Before you get rid of contaminated debris, be sure to put on your respirator and other protective gear.
If you have flood insurance, call your insurance company about the documentation you need to back up your claim. You may need to save pieces of carpet, flooring, and walls, and take photos of the extent of the damage. The Insurance Information Institute says some insurers may want to view your property remotely via video chat or even use drone footage to assess damage to your entire neighborhood.
If any household items, such as pieces of furniture or carpeting, have been damaged and you can’t clean and dry them within 24 to 48 hours of your house being flooded, discard them, the Centers for Disease Control and Prevention recommends. Chances are these items already harbor mold and can’t be saved. If there’s any item of value that has to be discarded, take a photo of it for your insurance claim.
Ask your town’s sanitation department about how to dispose of household items from your cleanup.
5. Remove Damaged Drywall
If the drywall in your home has more than 10 square feet total of water damage, the EPA recommends hiring a contractor with experience handling water damage to remove it. Any area smaller than that, however, you can deal with yourself. You’ll want to cut the drywall 15 to 24 inches above the visible water line.
“Take a utility knife, score the drywall, then punch it in,” Bishop says. Check with your local sanitation department to see whether you need to take the drywall to a dump yourself, or if you can just pile it up on your curb for trash pickup.
Then, if the insulation behind the drywall is damp, you’ll need to remove that, too. Nonporous materials, such as metal and glass, can simply be cleaned thoroughly with water and detergent and sanitized with a bleach and water solution. The CDC recommends 1 cup of bleach to 1 gallon of water to remove mold on hard surfaces.
Don’t seal any walls up with new insulation and drywall until everything is completely dry.
6. Remove Flooring
Even if they appear dry, ceramic tile, sheet vinyl, laminate, and solid wood floors should be removed because moisture and silt collects underneath them—and cause bacteria or mold to grow.
Once you discard these, ensure that everything is clean and dry before installing new flooring. Maintain your home’s humidity at 30 to 50 percent, and use a moisture meter to check that subflooring is at or below 16 percent moisture content before installing new flooring (for wood floors, manufacturers advise that the subfloor’s moisture content should be 13 percent or less). Be patient—it might take a few weeks for your flooring to return to reasonable moisture content, Bishop says.
If you’re unsure when you can reinstall flooring, the EPA recommends that you consult with a contractor or home inspector who has experience with flooding (see above).
7. Check Appliances and Countertops Thoroughly
Whatever you do, don’t plug in or otherwise provide power to your appliances right away (read our article “What to Know About Water-Damaged Appliances”), because their components could be corroded or damaged by floodwaters.
If an appliance, such as your washer or stove, has been submerged in floodwater, Consumer Reports recommends discarding it to be safe. If you think an appliance can be saved, make sure to hire a professional repair person to inspect it before putting it back into service.
“Mold doesn’t do a great job of growing on metals or ceramics,” says Bennett, the professor of Plant Biology and Pathology at Rutgers University. However, you still want to wipe down everything with bleach to sanitize and kill any possible mold.
If there’s no visible mold, the CDC recommends using a solution of 1 cup of bleach to 5 gallons of water for cleaning most nonporous surfaces, such as the metal on appliances. If you see mold growth, use 1 cup of bleach to 1 gallon of water. Be sure to rinse or wipe items and allow them to completely air-dry before you use them.
8. Vet the People You Hire. CHECK REVIEWS FIRST
Tools and Supplies Checklist
N95 respirator
Tight-fitting goggles
Long rubber or neoprene gloves
Humidity meter
Moisture meter
Buckets
Bleach
Shovels
Rakes
Garbage bags
Utility knife
